Opens in a new tab
  1. Home
  2. Repairs
  3. Pool Filter

When the water turns cloudyWe fix the filter

We diagnose filter leaks and flow problems. You receive a written estimate before we start working on your equipment.

  • Cartridge, DE and sand
  • $85 credited diagnostic

Call us when you noticeThese filter warning signs

We inspect the tank and internal parts to find the problem. The technician finds what failed and explains it before any repair.

  • Dirt returning to the pool

    Debris blowing out of the returns can point to a torn cartridge.

  • Water leaking from the band

    A drip at the middle ring can be a sign of a worn tank O-ring.

  • Unusually high pressure

    A gauge reading higher than normal can point to a dirty filter element.

  • Cracks in the fiberglass

    Visible tank damage can be a sign that the shell is failing.

  • DE powder in the water

    White powder in the pool can point to a torn grid or a broken manifold.

  • A broken pressure gauge

    A gauge stuck at zero can be a sign of a clogged air relief assembly.

From replacing the gridsTo installing a new tank

We service cartridge, DE and sand filters from major brands like Pentair, Hayward and Jandy. Our technicians check the tank seals, internal grids and backwash valves.

Filters commonly last around 10 years. We explain what failed and recommend replacement only when the tank is damaged or parts are no longer available.

  • Tank O-rings and clamps
  • DE grids and manifolds
  • Push-pull valves
  • Multiport valve repairs
  • Broken pressure gauges
Repair technician working on a variable-speed pool pump at a Las Vegas equipment pad

Deciding between a repairAnd replacing the filter

We help you compare the cost of internal parts to a complete new unit.

Repair the filter

  • The tank shell is in good condition
  • Only the cartridges need replacing
  • A valve needs a new seal
  • The filter is less than 10 years old

Replace the filter

  • The fiberglass tank is cracked
  • The center band will not seal
  • Internal parts are obsolete
  • The filter is too small for the pool

Send a photo of the filter label

Our diagnostic visit is $85, credited in full toward the repair when you approve it within 30 days. Photos of the filter label and any damage help prepare the visit but never replace an on-site diagnosis. You get a written estimate before any repair begins.

Common filter questions

All Questions
How often should a filter be cleaned?

Cartridge and DE filters need periodic cleaning. We include this four times a year on our Full Care Plus plan, or bill it separately when needed.

How much does a filter cleaning cost?

A cartridge filter cleaning is $95 and a DE filter cleaning is $115. These cleanings are included four times a year on the Full Care Plus plan.

Do you convert sand filters to cartridge?

Yes, we can upgrade your equipment pad with a new cartridge filter. Kingfisher installs Pentair, Hayward, and Jandy equipment, with one year on installation labor plus the manufacturer’s parts warranty.

Why is my pressure gauge so high?

High pressure can point to a dirty filter that needs cleaning. It can also be a sign of a blockage in the return lines.

Ready to get your poolFiltering properly again

Call us to schedule a filter diagnostic in the Las Vegas valley. We will find the problem and explain the repair.